Yaesu FT-7800R, Руководство по эксплуатации

Страница: 40 / 80

38 FT-7800R O
PERATING
M
ANUAL
M
EMORY
O
PERATION
H
YPER
M
EMORY
C
HANNEL
O
PERATION
The FT-7800R usually stores, into memory, the operating frequency and some aspects of
operating status (such as VFO scan, CTCSS/DCS data, repeater shift, power level etc.).
However, the “Hyper Memory” Mode allows you to store the total current configuration of
the radio into a special “Hyper” memory bank.
Hyper Memory Storage
1. Set up the transceiver according to the desired con-
figuration.
2. Press and hold in, for two seconds, the Hyper
Memory key ([
1 ] through [ 5 ]), corresponding to
the Hyper Memory channel into which you wish to
store this configuration.
Hyper Memory Recall
Press the appropriate Hyper Memory key ([ 1
] through
[ 5 ]) to recall the desired Hyper Memory channel.
On Hyper Memory Channels “2” through
“5,” the current (original) configuration will
lost when you recall any other Hyper Memory Chan-
nel. To prevent this from happening, press and hold
in the (current) Hyper Memory key to store the current configuration into that Hyper
Memory Channel before recalling anothe Hyper Memory Channel, or set Menu #17
(HYPER) to enable the Automatic Writing feature for all Hyper Memories, including
Hyper Memory “1.” See page 70 for details.