Yaesu FT-7800R, Руководство по эксплуатации

Страница: 35 / 80

33 FT-7800R O
PERATING
M
ANUAL
M
EMORY
O
PERATION
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
To Append an Alpha-numeric “Tag” to a Memory
1. After pressing and holding in the [
V/M ( MW )] key in
step 4 above, rotate the DIAL knob to select the first
character in the name you wish to store, the press the
[
BAND
(
SET
)] key momentarily to move on to the next character. Letters, numbers, and
symbols are available for storage.
2. Again rotate the DIAL knob to select the desired letter, number, or symbol, then press the
[ BAND ( SET )] key momentarily to move on to the next character’s slot. If you make a
mistake, press the microphone’s [ DWN
] button to move
back to the previous character’s slot, then re-select the
correct letter, number, or symbol.
3. Repeat the above step to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
4. When you have completed the creation of the label, press
and hold in the [
BAND ( SET )] key for 1/2 second to
save the label and exit to normal operation.
Storing Independent Transmit Frequencies (“Odd Splits”)
1. Store the receiving frequency using the method already described.
2. Turn to the desired transmit frequency, then press and hold in the [
V/M
(
MW
)] key for
1/2 second.
3. Within ten seconds of pressing the [ V/M
(
MW
)] key, use the
DIAL knob or microphone’s
[
UP
]/[
DWN
] buttons to select the same memory channel number as used in step 1 above.
4. Press and hold in the PTT switch, then pressing and holding the [ V/M
(
MW
)] key for
1/2 second while holding the
PTT
switch to save the entry and exit to normal operation.
This will not cause transmission; instead, it signals the microprocessor that a separate
transmit frequency is being programmed into that memory register.
Whenever you recall a memory which contains in-
dependently-stored transmit and receive frequen-
cies, the “ ” indication will appear in the display.