Yaesu FT-7800R, Руководство по эксплуатации

Страница: 36 / 80

34 FT-7800R O
PERATING
M
ANUAL
Memory Recall
1. While operating in the VFO mode, press the [
V/M ( MW )]
key momentarily to enter the Memory mode.
2. Rotate the DIAL knob to select the desired channel. If
you press the [ MHz
(
PRI
)] key momentarily, then rotate the
DIAL knob, you’ll be able to
scroll through the memory channels at a rate of 10 channels per click of the
DIAL
.
3. When selecting a memory channel that has an alpha-numeric “Tag” (label) appended,
press the microphone’s [
B ] key momentarily to switch
the Memory Channel display between the “Frequency”
format and “Alpha-numeric Tag” format.
4. To return to the VFO mode, press the [ V/M
(
MW
)] key momentarily again.
When the radio is already set to the Memory mode, an easy way to recall memo-
ries is to enter the microphone’s key in the memory channel number. For ex-
ample, to recall memory channel #4, press
[
0
] [
0
] [
4
]
.
Memory Offset Tuning
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
1. With the FT-7800R in the “MR” (Memory Recall) mode, select the desired memory
channel.
2. Now press the [ BAND
(
SET
)] key momentarily; the
“
MT
” icon will appear on the display.
3. Rotate the DIAL knob, as desired, to tune to a new fre-
quency. The synthesizer steps selected for VFO operation on the current band will be the
steps used during Memory Tuning.
4. If you press and hold in the [
SCAN
(
SEL
)] key for 1/2 second during Memory Tuning,
the data will now have been copied to VFO, although the original memory contents will
remain intact on the previously-stored channel.
5. If you wish to return to the original memory frequency, press the [ BAND
(
SET
)] key
momentarily. The “
MT
” icon will disappear.
M
EMORY
O
PERATION
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION