Yaesu FT-70DR, Руководство по эксплуатации

Страница: 16 / 44

14 FT-70DR/FT-70DE Operating Manual
Operation
Turning the Transceiver ON
1. Press and hold the
Power
(
Lock )
switch to
turn the transceiver
ON
.
● Turning the transceiver OFF
Press and hold the Power
(
Lock
)
switch again
to turn the transceiver OFF .
● Inputting the call sign
The first time the transceiver is turned ON af-
ter it is purchased; input your own call sign.
z
Inputting characters
Input the callsign with the ten key or
DIAL knob.
• Rotate the DIAL knob to select any of the 38
available characters:.
···

0
–
9

A
–
Z

(space)

-
*

/
*

···
* The ” - ” and ” / ” may not be input for the first
callsign character.
• Press the keys repeatedly to toggle among the
four available characters associated with that
key. For example: pressing the [2] repeatedly
will toggle through
A → B → C → 2 → A ···
z
Moving the cursor and deleting the input characters:
[
BAND
]
key׃ Moves the cursor to the right
[
MODE
]
key׃ Moves the cursor to the left
[
GM
]
key׃ Press and hold to erase all characters after the cursor
z
Saving the inputted call sign:
Press the [
F
] key or the
PTT
switch
z
The Call Sign ID can be changed using set mode item [ 64 MYCALL
] ( 37).
Up to 10 characters can be entered.
z
Characters that may be inputted for the call sign are the numbers 0-9, letters ”A – Z” in upper
case, the hyphen and the slash.
Adjusting the Volume Level
1. While pressing and holding the VOL knob, rotate the DIAL knob to adjust the volume
to a comfortable level.