Yaesu FT-70DR, Руководство по эксплуатации

Страница: 34 / 44

32 FT-70DR/FT-70DE Operating Manual
(4) Registered node ID or room ID screen
(the C1 - C5 screen)
• Rotate the
DIAL
knob to select a previously regis-
tered node/room (maximum 5 nodes/rooms) on the
C1
-
C5
screen and, then press the [
AMS
] key or
PTT switch to connect to the node/room.
•
Registering the node/room:
Press and hold the [ 1 ] - [ 5 ] key to register the node/room ( C1 - C5 ) on the con-
nected node ID or room ID screen ( Cn ).
•
Cancelling the connected node/room:
Select the node/room ( C1 - C5 ) then press and hold the [ HM/RV ] key to delete the
registered node/room.
(5) Direct entry screen (the En screen)
Direct connection to a node or room may be made
by inputting the other node ID or room ID (5 digits)
manually.
• Pressing the numeric keys (5 digits), and then press of the [ AMS ] key will request
connection with another node ID or room ID.
• Clearing the input node ID or room ID:
Press and hold the [
HM/RV
] key
• Cancelling the input node ID or room ID:
Pressing the [
BAND
] key to return to the node ID screen (
Lc
) or the connecting
node ID or room ID screen ( Cn ).
When a node has been connected, the node or room connection may be changed by
inputting a different node ID or room ID.
When connecting to a node or room, “ CONECT ” (CON-
NECT) is displayed on the screen, and the display is au-
tomatically switched to the connecting node ID or room
ID screen (
Cn
).
In the case when the selected node or room is not connected, one of the following will be
displayed on the screen.
“
OFLINE ” (OFFLINE): Node or room is not in operation.
“ BUSY ”: Another node is connecting.
7. Transmit to communicate with the WIRES-X Internet Link.
z
Operations of the [ AMS ] key, PTT switch, [ BAND ] key, and [ V/M ] key are described in the below chart.
Operation method
(Operation screen)
Description
Press the [ AMS ] key or the PTT switch
(C0 / C1 - C5 / En screen*)
Connect to the displayed node/room or change
the destination connection.
(*The
PTT
switch is disabled on the En screen)
Press and hold the [ BAND ] key
(Lc / Cn / C0 / C1 - C5 / En Screen)
Disconnect from the connected node or room.