Yaesu FT-70DR, Руководство по эксплуатации

Страница: 40 / 44

38 FT-70DR/FT-70DE Operating Manual
Restoring to Defaults (Reset)
All Reset
To restore all transceiver settings and memory content to the factory defaults.
CAUTION!
Resetting the transceiver will clear all memories.
Please make a note of the memories (memory channel settings, etc) before resetting.
1. Turn the transceiver OFF .
2. Press and hold the [ MODE
] key, the [
HM/RV
]
key and the [ AMS
] key and turn the transceiver
ON simultaneously.
The beep sounds and the confirmation
screen is displayed.
3. Press the [ F
] key.
• The beep will sound, and the transceiver
will reset all factory defaults.
• After resetting all defaults, the call sign
input message appears on the LCD. Set
the call sign ( 14).
To cancel the resetting, press any key except the [ F
] key.
Set Mode Reset
All the Set mode only, settings can be restored to the default settings.
1. Turn the transceiver OFF .
2. Press the [ MODE
] key and the [
V/M
] key and
turn the transceiver ON simultaneously.
The beep sounds and the confirmation
screen is displayed.
3. Press the [
F
] key then the beep sounds and
all Set mode settings are reset to defaults.
Perform All Reset to restore all of the following Set Mode items to default.
1 ANT.ATT 8 BELL 9 BNK.NAM 11 CLK.SFT 13 DCS.INV
17 DP-ID 19 DT SET 33 MEM.NAM 35 NM/FRQ 36 OPN.MSG
37 PAG.ABK 38 PAG.CDR 39 PAG.CDT 41 PSWDWT 44 RF SQL
46 RPT.FRQ 47 RX MOD 49 SCM.WTH 50 SCV.WTH 54 SQL.EXP
62 W/N.DEV 64 MYCALL
To cancel the resetting, press any key except the [ F
] key.