Yaesu FT-70DR, Руководство по эксплуатации

Страница: 22 / 44

20 FT-70DR/FT-70DE Operating Manual
4. To check whether or not other stations are operating within communications range,
press the [ GM
] key to turn the GM (Group Monitor) function ON.
• The other stations also need to turn the GM (Group Monitor) function ON.
• While operating with the GM (Group Monitor) function, “Operating Frequency”,
“GROUP” and “DG-ID number” are shown repeatedly on the LCD.
5. Press the [ GM
] key to turn the GM (Group Monitor) function OFF and return to the normal operation.
z
While setting the DG-ID number, pressing and holding the [ HM/RV
] key will set the transmit
and the receive DG-ID numbers to “00”.
z
If the receive DG-ID is set to a number other than “00”, only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to “00” except when communication is
desired only with group members.
z
The transmit and receive DG-ID default number is set to “00”.
Communicating only with the specific members by setting the DG-ID number except for “00”
Example Set the DG-ID number of to “50”
1. Press and hold the [ MODE
] key.
• The DG-ID number setting screen appears and the
transmit DG-ID number “T00” blinks.
• Rotate the DIAL knob to set the transmit DG-ID num-
ber to “T50”.
2. Press to the [ MODE
] key again to blink the receive DG-
ID number “R00”.
Rotate the
DIAL knob to set the reception DG-ID num-
ber to “R50”.
3. Press and hold the [
MODE ] key or press the PTT
switch to save the setting and re-
turn to normal operation.
Tuning to the same frequency and setting the same DG-ID for all the group members
will enable communication between the members and exclude other signals.
4. Press the [ GM
] key to turn the GM (Group Monitor) function ON and check whether or
not other stations that are operating on frequency, with the GM (Group Monitor) func-
tion ON, and have the same GD-ID number setting, are in the communication range.
• The other stations also need to turn the GM (Group Monitor) function
ON .
• During operating on the GM (Group Monitor) function, “Operating Frequency”,
“GROUP” and “DG-ID number” are shown repeatedly on the LCD.
5. Press the [ GM
] key to turn the GM (Group Monitor) function OFF and return to the normal operation.
z
While setting the DG-ID number, pressing and holding the [
HM/RV ] key will set the transmit
and the receive DG-ID numbers to “00”.
z
If the receive DG-ID is set to a number other than “00”, only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to “00” except when communication is
desired only with group members.