Yaesu FT-70DR, Руководство по эксплуатации

Страница: 39 / 44

37 FT-70DR/FT-70DE Operating Manual
No. Set Mode item Description
Selectable options
(Options in bold are the default settings)
31 MCGAIN Adjust the microphone gain level. LEVEL1 – LEVEL5 – LEVEL9
32 M/T-CL
Select the function of the [MONI/T-CALL]
switch.
MONI
/ T-CALL*
(*: Eurpean / Asian Version)
33 MEM.NAM Input the memory channel tag.
(Up to 6 letters)
34 MW MOD
Set the automatic channel number increment
when registering to a memory channel.
LOWER / NEXT
35 NM/FRQ
Select the memory channel tag display or
frequency display
FREQ / ALPHA
36 OPN.MSG
Select the Opening Message that appears
when the transceiver is ON.
OFF / MSG / DC
37 PAG.ABK Turn the pager answer back Function ON/OFF OFF / ON
38 PAG.CDR Specify a personal code (receive). 01 – 05 – 50, 01 – 47 – 50
39 PAG.CDT Specify a personal code (transmit). 01 – 05 – 50, 01 – 47 – 50
40 PASSWD Turn the password function ON or OFF. OFF / ON
41 PSWDWT Input the password.
(four digits)
42 PTT.DLY Set the PTT delay time.
OFF
/ 20 MS / 50 MS / 100 MS / 200 MS
43 RAD ID
Display the transceiver specific number
(5 digits alphanumeric ID). (Uneditable)
(Radio ID display)
44 RF SQL Adjusts the RF Squelch threshold level. OFF / S1 – S9
45 RPT.ARS Turn the ARS function on/off. OFF / ON
46 RPT.FRQ Set the repeater shift width. 0.00M – 150.00M
47 RX MOD Select the receive mode. AUTO / FM / AM
48 RX SAVE Set the battery save time. OFF / 0.2 S – 60.0 S
49 SCM.WTH Set the memory scan frequency range. ALL / BAND
50 SCV.WTH Set the VFO scan frequency range. ALL / BAND
51 SCN.LMP
Set the scan lamp ON or OFF when scan-
ning stops.
OFF / ON
52 SCN.RSM Configure the scan stop mode settings. 2.0 S – 5.0 S – 10.0 S / BUSY / HOLD
53 SCN.STR Set the scanning restart time. 0.1 S – 2.0 S – 10.0 S
54 SQL.EXP
Set a squelch type separately for Receive
and transmit.
SPL.OFF / SPL.ON
55 TEMP
Indicates the current temperature inside the
transceiver
(temperature display)
56 TOT Set the timeout timer. OFF / 0.5M – 3.0M – 10.0 M
57 TS MUT
Turn the muting function on/off during tone
search.
OFF / ON
58 TS SPD Select a tone search speed. FAST / SLOW
59 VER.INF
Display the CPU and DSP firmware version
of the transceiver.
(C x.xx)
/ (D x.xx)
*Rotate DIAL knob to select
60 VFO.MOD
Set the frequency setting range in the VFO
mode by DIAL knob.
ALL / BAND
61 WX ALT Turn the weather alert scan on/off. OFF / ON
62 W/N.DEV Set the Transmit Modulation Level. WIDE / NARROW
63 W-DGID Setting of the WIRES-X DGID AUTO / DGID01 – DGID99
64 MYCALL Set the call sign.
(up to 10 characters)