Yaesu FT-2600M, Руководство по эксплуатации

Страница: 35 / 62

FT-2600M O
PERATING
M
ANUAL
33
Memory System Operation
R
ECALLING
M
EMORIES
From the VFO mode, momentarily press the [ D/MR ] key once to activate the “
MR
” (
M
emory
R
ecall) mode.
When more than one memory has been stored, use the
Main Dial
knob to select a memory
for operation. Alternatively, microphone’s [ UP ] and [ DWN ] buttons may be used to step
or scan through the available memories. When using the microphone’s buttons, press and
immediately release the button to move one step up or down; press and hold the [
UP
] or
[
DWN
] button for one second to begin memory scanning.
While you are operating in the
MR
mode, the “
M
” notation will appear at the right side of
the display.
M
EMORY
R
ECALL FROM
MH-36
B6J
M
ICROPHONE
While operating in the VFO, H
OME
Channel (see below), or Memory Recall mode, the
keypad of the MH-36
B6J
may be used for direct recall of memory channels.
To do this, press the Channel Number you wish to recall, then press the [
*
] key. For ex-
ample, to recall Memory Channel 5, press [
5
]
⇒
[
*
]. To recall Channel number 118, press
[ 1 ]
⇒
[ 1 ]
⇒
[ 8 ]
⇒
[
*
].
T
O
T
URN ON THE
A
LPHA
-N
UMERIC
M
EMORY
N
AME
D
ISPLAY
If you are in the “
MR
” mode, press the [
A/N
] key to replace the frequency display with the
Alpha-Numeric Label.
à