Yaesu FT-2600M, Руководство по эксплуатации

Страница: 19 / 62

FT-2600M O
PERATING
M
ANUAL
17
Operation
D
ISPLAY
B
RIGHTNESS
The FT-2600M display illumination has been specially engineered to provide high visibil-
ity with minimal disruption of your “night vision” while you are driving. The brightness of
the display is manually adjustable, using the following procedure:
(1) Press and hold in the [
MHz
] key for one second, then rotate the
Main Dial
knob to
select “
12 DIMR
.”
(2) Press the [ MHz ] key, then rotate the Main Dial knob to select a comfortable bright-
ness level:
D1
,
D2
,
D3
,
D4
, or
OFF
(no illumination).
(3) Press and hold in the [
MHz
] key for one second to save the new setting and exit to
normal operation.
T
UNING
: T
HE
“D
IAL
•E(VFO) M
ODE
This mode is used for selecting a frequency utilizing the Main Dial knob and microphone
[
UP
] and [
DWN
] buttons allow the Variable Frequency Oscillator (VFO) to tune in the
selected step size. When scanning in the VFO mode, the same steps are used as in manual
tuning.
Clockwise rotation of the
Main Dial
knob increases the operating frequency, while counter-
clockwise rotation tunes toward a lower frequency.
To move frequency rapidly (in 1 MHz steps), press the [ MHz ] key momentarily, then
rotate the
Main Dial
knob. The 1 MHz digit of the frequency display will blink while “1
MHz Tuning” is enabled. When you have selected the desired “1 MHz” frequency digit,
press the [
MHz ] key momentarily once more, then resume normal tuning using the Main
Dial knob.
C
HANNEL
S
TEP
S
ELECTION
Tuning steps are factory preset to default increments which are appropriate for the country
to which this radio is exported.
To change to another step size, use the following procedure:
(1) Press and hold the [
MHz ] key for one second, then rotate the Main Dial knob to select
“
29 STEP
.”
(2) Press the [ MHz ] key, then rotate the Main Dial knob to select the desired step size:
5.0
/
10.0
/
12.5
/
15.0
/
20.0
/
25.0
/
50.0
(kHz).
(3) Press and hold in the [ MHz ] key for one second to save the new setting and exit to
normal operation.