Yaesu FT-2600M, Руководство по эксплуатации

Страница: 20 / 62

FT-2600M O
PERATING
M
ANUAL
18
D
IRECT
K
EYPAD
F
REQUENCY
E
NTRY
(MH-36
B6J
M
ICROPHONE
)
The keypad of the MH-36
B6J
DTMF Microphone may be used for direct entry of the oper-
ating frequency. It also may be used for recall of memory channels.
To enter a frequency from the MH-36
B6J
keypad:
(1) Press the [
D/MR
] key, if necessary, to set the transceiver into the VFO mode.
(2) While receiving on any VFO frequency, enter the digits of the desired frequency.
For example, to enter 146.520 MHz, press [
1
]
⇒
[
4
]
⇒
[
6
]
⇒
[
5
]
⇒
[
2
]
⇒
[
0
].
A high-pitched “beep” will confirm each key closure as you enter the digits; the final
“beep” will be of longer duration, to confirm that the frequency entry is complete.
(3) The [ # ] key may be used to abbreviate the entry procedure. Pressing the [ # ] key sets
the current digit and all following digits to “ 0 ” to complete the entry.
For example, to enter 146.500 MHz, press [
1
]
⇒
[
4
]
⇒
[
6
]
⇒
[
5
]
⇒
[
#
].
To enter 144.000 MHz, press [
1
]
⇒
[
4
]
⇒
[
4
]
⇒
[
#
].
Recalling memories is equally simple (see page 32 for details on memory operation). You
can recall a memory from the MH-36
B6J
from any operating mode: VFO, H
OME
, or Memory.
(1) Press the Channel Number you wish to recall, then press the [
*
] key. For example, to
recall Memory Channel 2, press [
2
]
⇒
[
*
]. To recall Channel number 135, press
[ 1 ]
⇒
[ 3 ]
⇒
[ 5 ]
⇒
[
*
].
(2) To return to the VFO mode, press the front panel’s [
D/MR
] key or the microphone’s
[ P ] key twice (the first press recalls the H
OME
channel memory; see page 34).
(3) If you are in the Memory Recall mode, you can enter a new operating frequency di-
rectly, as described above for VFO operation. However, you will observe that a “
T
”
indicator will appear at the right side of the display; this indicates that you have switched
to the “Memory Tune” mode, which is described in detail on page 34.
Operation