FT-252 O
peraTing
M
anual
58
Set Mode Item 21
[
LAMP
]
Function
: Selects the LCD/Keypad Lamp mode.
Available Values
: KEY/CONT/OFF
Default
: KEY
KEY: Illuminates the Keypad/LCD lamp for five seconds when you rotate the
DIAL
knob or press the keypad or any switch (except
PTT
switch). This is the facto
-
ry-programmed default setting.
CONT: Illuminates the Keypad/LCD lamp continuously.
OFF
: Disables the Keypad/LCD lamp.
Set Mode Item 22
[
LOCK
]
Function
: Selects the Control Locking lockout combination.
Available Values
: LK KEY/LKDIAL/LK K+D/LK PTT/LK P+K/LK P+D/LK ALL
Default
: LK K+D
Note
: “K” = “Key;” “D” = “Dial;” and “P” = “PTT.”
Set Mode Item 23
[
M/TCAL
]
Function
: Selects the
[
VOL/SQL
]
key function.
Available Values
: MONI/T-CALL
Default
: Depends on the transceiver version.
MONI: Pressing the
[
VOL/SQL
]
key causes the Noise/Tone Squelch to be over-
ridden, allowing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the
[
VOL/SQL
]
key activates a 1750-Hz burst tone, used for repeater
access in many countries (especially in Europe).
Set Mode Item 24
[
MEM.TAG
]
Function
: Stores Alpha-Numeric “Tags” for the Memory channels.
See page 24 for details.
Set Mode Item 25
[
NAME
]
Function
: Toggles the display indication between “frequency” and the channel’s “Alpha/
Numeric Tag.”
Available Values
: FREQ/ALPHA
Default
: FREQ
Set Mode Item 26
[
PASSWD
]
Function
: Enables/disables the Password feature.
Available Values
: PWD.OFF/PWD. ON
Default
: PWD.OFF
Set Mode Item 27
[
PSWD W
]
Function
: Stores the password.
Available entries are 0-9, A, B, C, D, E, and F.
Set
(
Menu
)
Mode
honbun_130313.indd 58
2013/03/13 19:48:12
