Yaesu FT-252, Руководство по эксплуатации

Страница: 61 / 68

FT-252 O
peraTing
M
anual
59
Set Mode Item 28
[
R SHIFT
]
Function : Sets the magnitude of the repeater Shift.
Available Values : 0.00 - 99.95 MHz (50 kHz increments)
Default : Depends on the operating band and transceiver version.
Set Mode Item 29
[
RESUME
]
Function : Selects the Scan Resume mode.
Available Values : BUSY/HOLD/TIME
Default : TIME
BUSY: The scanner will hold until the signal disappears, then will resume when the
carrier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME : The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
Set Mode Item 30
[
REV/HM
]
Function : Selects the function of the [
REV
(
HOME
)] key.
Available Values :
<
REV
>
/
<
HOME
>
Default : <REV>
<REV>: Pressing the [ REV
(
HOME
)] key reverses the transmit and receive frequencies
during repeater operation.
<HOME>: Pressing the [ REV
(
HOME
)] key instantly recalls a favorite “Home” channel.
Set Mode Item 31
[
RF SQL
]
Function : Adjusts the RF Squelch threshold level.
Available Values : S-1/S-2/S-3/S-4/S-5/S-7/S-FULL/OFF
Default : OFF
Set Mode Item 32
[
RPT.MOD
]
Function : Sets the Repeater Shift Direction.
Available Values : RPT.OFF/RPT. –/RPT. +
Default : Depends on the transceiver version, as well as the setting of Set Mode Item 5:
ARS
.
Set Mode Item 33
[
PRI.RVT
]
Function
: Enables/disables the Priority Revert feature.
Available Values : RVT.OFF/RVT. ON
Default
: RVT.OFF
See page 36 for details.
Set Mode Item 34
[
RXSAVE
]
Function
: Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Available Values : 200 MS(1:1)/300 MS(1:1.5)/500 MS(1:2.5)/1 S(1:5)/2 S(1:10)/OFF
Default
: 200 MS
Set
(
Menu
)
Mode
honbun_130314.indd 59 2013/03/14 17:46:52