VFO A / VFO B
Edit the VFO A / VFO B configurations for each band on this page template.
VFO A / VFOB
About the setting items of VFO A / VFO B frequencies
• Receive Frequency
Enter the VFO frequencies for each band. The FTM-300DR/DE default Frequencies are pre-entered into
the ADMS-12 standard template.
A frequency that is out of the transceiver’s range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.
• Transmit Frequency
The transmit frequency display is grayed out, and it will be set automatically, in accordance with the re-
ceive, and the offset frequencies.
•
Offset Frequency
When a transmit frequency is not entered, transmission will be performed at a frequency obtained by add-
ing/subtracting the offset frequency to/from the receive frequency.
•
Offset Direction
Set the frequency shift direction.
OFF:
The transmit frequency is not shifted.
-RPT:
The transmit frequency is shifted to the minus offset.
+RPT:
The transmit frequency is shifted to the plus offset.
• AUTO MODE
When tick the check box of AUTO MODE, the receive mode (FM mode or AM mode) is automatically se
-
lected. Un-ticking the checkbox enables selecting the operating mode.
•
Operating Mode
Select the operating mode for receive channel.
FM:
The selected frequency band is set to FM mode.
AM:
The selected frequency band is set to AM mode.
24
