Yaesu ADMS-12, Инструкция по эксплуатации

Страница: 18 / 30

Communications (Data communication with the FTM-300DR/DE)
Get Data from SD card
This command imports the settings data from the microSD memory card to the ADMS-12 programmer, and
creates a new data file.
1. Insert the microSD memory card with the saved data from FTM-300DR/DE to the computer.
2. Click “
Get Data from SD card
” in the “
Communications
” menu, then select the data area to read
from the following.
ALL
/
MEMORY
/
SETUP
3. Select the file in the following folder of the microSD card drive according to the selected area.
ALL : “ CLNFTM300D.dat ” file in the “ FTM-300D ” folder - “ BACKUP ” folder
MEMORY : “ MEMFTM300D.dat ” file in the “ FTM-300D_MEMORY-CH ” folder
SETUP : “ SYSFTM300D.dat ” file in the “ FTM-300D ” folder - “ BACKUP ” folder
4. Click [ Open ].
5. Click [ OK ].
When the data transfer is complete, the template screen which was imported from the FTM-300DR/DE via
the microSD memory card will appear on the ADMS-12 screen.
This template and configuration data may be saved to the computer hard drive, using the “Save” or
“Save as” commands in the “File” menu.
The folder configuration of the micro-SD card
The parameters of each function are stored in the following folders.
(root)
FTM300D
GPSLOG: GPS Log data (yymmddhhmmss.log)
FTM300D_MEMORY-CH: Memory channel data (MEMFTM300D.dat) : MEMORY
PHOTO: image data (M+(RADIO ID)+xxxxx.jpg)
QSOLOG: Message data
VOICE: Voice recording data (yymmddhhmmss.wav)
BACKUP: Various settings data
(CLNFTM300D.dat) : ALL
(SYSFTM300D.dat) : SETUP
17