Yachting Electronic Co. NAKI8850B, Руководство пользователя

Страница: 30 / 59

1. Find an appropriate position on the ice surface. Clear
away snow to expose the ice surface, making sure the
surface is smooth.
2. Spray a small amount of liquid water on the ice and set
the sensor on the water allowing the unit to freeze to the
ice.
3. If there are any air pockets between the sensor and ice,
the unit will not work properly, and will require you to
try another spot, or cut a hole in the ice to put the sensor
directly into the water.
4. To remove the sensor from the frozen ice, gently tap the
sensor at the base with your hand. If it will not come
loose, spray a small amount of water on the ice surface
around the base and repeat step 4 until the sonar sensor
is easily removed.
Note: Note: Due to various environmental conditions, the above
process may be a little different in some situations.
Warning: Warning: Never use a blunt object to strike the sonar
sensor as this may cause damage to the sensitive internal