Yachting Electronic Co. NAKI8850B, Руководство пользователя

Страница: 13 / 59

Installing the transducer Installing the transducer
Trans Transom installati om installation (for T810 transducer) on (for T810 transducer)
1. Select the 1. Select the mounti mounting location ng location
When you select a mounting location for the transducer,
the flowing should be considered in advance.
The sonar transmission / reception can be affected severely
in turbulent water, so please do not mount transducer behind
strakes, rows of rivet, water intake, discharge port, the
immediate area of the propeller(s). These areas can create
turbulence when the boat moves in a high speed.
Do not mount the transducer in locations where it may be
vibrate severely when the boat’s engine launches or stop.
After the installation is finished, make sure the transducer is
pointed down straightly to the water surface.
2. Mark the loca 2. Mark the location and tion and drill the mounting holes drill the mounting holes
1) Make sure the boat is level and no obvious incline of the
shipboard
DŽ
2) Hold the template against the transom of boat
ˈ
mark
two mounting holes in the two slots. The center of two