manualshive.com logo in svg

Yachting Electronic Co. NAKI8850B, Руководство пользователя

Поделиться
Скачать
Yachting Electronic Co. NAKI8850B Скачать руководство пользователя страница 25

    speed and choose another location for the transducer. 

5) Repeat step 4 until you get the best mounting location 
    for the transducer.

3. The Permane

3. The Permanent Sho

nt Shoot-Thru-Hull installation

ot-Thru-Hull installation

1) make sure the surface of the chosen location is clear

ǃ

    dry and free of any oil, then sand the mounting surface 
    of transducer with 100 grit sandpaper until it looks very 
    clean and flat.

2) Wipe off the sand debris on mounting surface with a 
    piece of cloth, and then clean the mounting surface of 
    hull and transducer with rubbing alcohol. 

3) Get a quantity of epoxy and hardener, mix them in a
    certain proportion and thoroughly, slowly stir them on a 
    paper plate. Avoid forming air bubbles in the epoxy.

4) When the epoxy looks unworkable (about 20minietes 
    are needed from the beginning you mixing them), make 
    sure there are no air bubbles in the epoxy layer, then 
    spread a thin layer of epoxy on the surface of transducer, 
    a  comparably thick layer to the surface of sand area on 
   

Содержание NAKI8850B




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды