Yachting Electronic Co. NAKI8850B, Руководство пользователя

Страница: 18 / 59

tow holes approximate 3/8” (10mm) deep.
2) Apply some marine sealant to the hole, and then tighten
the cable clamp with two screws.
3) If more than one cable clamp are needed, repeat
step1
ˈ
2
Note Note
˖
As the transducer is adjustable
ˈ
make sure the cable
between the transducer and the first clamp is not tighten.
Enough slack should be remained; otherwise the transducer
cable is easily damaged. To make sure such damage will not
happen
ˈ
please rotate the transducer to the utmost position
before tighten the first cable clamp (see figure-7).
4) When route the transducer cable to the sonar unit, avoid
The template touchs the transducer