Yacht Devices YDTA-04N, Руководство пользователя

Страница: 27 / 40

— 27 —
The transmission interval for this message can be configured with YD:PGN command (see 1.5 in this
Section). If some other equipment sent this message, the Adapter will immediately send its own message
after it with the corrected value of estimated fuel remaining.
Example 1.
Send summarized data from channels A and B in PGN 127496:
YD:JOIN AB
Example 2.
Turn off the transmission of PGN 127496:
YD:JOIN NONE
4.4 YD:SW<A..D><1..4> [<ON|OFF> [conditions]]
This setting enables, disables and configures up to 8 rules for each measurement channel to control NMEA
2000 digital equipment. This command is described in the Section VII.
VII. Digital Switching
The Tank Adapter supports NMEA 2000 digital switching equipment (managed with Standard PGNs
127501 and 127502). The Device can send commands to turn on/off electrical loads connected to external
NMEA 2000 two-state devices (e. g. relay banks).
The Tank Adapter is compatible (not only) with:
* Yacht Devices NMEA 2000 Circuit Control YDCC-04. Circuit Control has one bank of four
latching (bi-stable) relays capable of switching direct current (DC) and alternating current (AC) loads.
Tank Adapter can be used to automatically fill the main fuel tank from reserve tank, or to stop filling of
the live well tank when it is full, or balance two ballast tanks.
* Yacht Devices Alarm Button YDAB-01.
The Alarm Button is a digital switching «music box»;
it has a powerful sound amplifier inside and a connection to a sound speaker. The Tank Adapter can
turn ON any of 28 alarm sounds (or even voice messages uploaded by a user) of the Alarm Button. For
example, you can activate an alarm when the fuel level is low.