Yacht Devices NMEA 2000 YDBM-01, Руководство пользователя

Страница: 38 / 66

— 38 —
Syntax Examples Description
YD:CHARGED_VOL
[1..40|UNKNOWN]
YD:CHARGED_VOL 13.8 One of the 3 charged criteria: sets
voltage (in volts) which is sufficient
to consider the battery as fully charged
when the battery voltage remains
above this value (1..40 V, in 0.1 V
steps). The value should always be
set slightly (0.3..0.5V) lower than
the cut-off (the end of charge) voltage
of the charger.
Factory setting: 13.2
UNKNOWN sets voltage to
the default value for Lead Acid
and Lithium Ion types), see Table 1
in X.3. Use UNKNOWN for NiCD,
NiMH batteries.
YD:CHARGED_CUR [0.5..10.0] YD:CHARGED_CUR 4.8 One of the 3 charged criteria:
sets the end-of-charge condition:
if the charge current drops below
this value (expresses as a percentage
of the nominal capacity), the battery
is considered as fully charged
(0.5..10%, in 0.1% steps)
Factory setting: 4
Table 1 continued