Yacht Devices NMEA 2000 YDBM-01, Руководство пользователя

Страница: 28 / 66

— 28 —
Section Parameter Notes
TEMPERATURE =x|UNKNOWN x — integer from 0 to 252.
Factory setting:
UNKNOWN
NMEA 2000 temperature instance
(don’t confuse with NMEA 2000
device instance or data type)
for the battery temperature measuring
device. If no such device is present, set
to UNKNOWN.
BATTERY=x x — integer from 0 to 252.
Factory setting: 0
NMEA 2000 battery instance
of the Device. 0 for the first or single
battery, 1 is for the next and so on.
DC_TYPE=BATTERY|ALTERN
ATOR|CONVERTOR|SOLAR_
CELL|WIND_GENERATOR
Factory setting: BATTERY DC Type for PGN 127506 «DC Detailed
Status». Legacy NMEA 2000 devices
may not support this PGN.
CAPACITY=x x — integer from 1 to
65532.
Factory setting: 100
Battery capacity in ampere hours
in PGN 127513 «Battery Configuration
Status».
IMPORTANT! When you change
this parameter, all calculation results
for SoC, consumed ampere-hours,
time remaining and SoH
are automatically reset (1).
NOMINAL_RATE=x x — integer from 1 to 100.
Factory setting: 20
Battery discharge rate (in hours)
at which the manufacturer rates
the battery capacity.
Table 1 continued