Ya-man Waterpik WF-03, Руководство пользователя

Страница: 8 / 34

8
GETTING STARTED
Inserting Batteries
1.
Slide the reservoir as shown in the figure to remove it.
2.
Rotate the lock mechanism on the battery cover counterclockwise to the unlock position, then remove the battery cover from the main unit.
3.
Insert AA batteries as shown in the figure. AA alkaline dry-cell batteries are provided with the product for trial purposes.
4.
Press the battery cover in place so the arrow on the cover matches the arrow on the main unit, then rotate the battery cover lock knob clockwise.
If the water pressure drops while the product is operating, replace the batteries. The product can be used around 40 times after the batteries are replaced.
However this varies depending on the battery type and conditions of use.
Important
When replacing the batteries, apply commercially available lubricant to the O-ring and battery case.
Apply a thin, even coat of commercially available lubricant to the O-ring (black waterproof rubber ring) on the inside of the battery cover.
Apply a thin, even coat of commercially available lubricant to the parts of the battery case cover on the main unit side which the O-ring contacts as shown in the
figure.
1
2
3
4