Ya-man Waterpik WF-03, Руководство пользователя

Страница: 12 / 34

12
CLEANING YOUR WATERPIK
®
WATER FLOSSER
Using mouthwash or other solution
The Waterpik® Water Flosser can use mouthwash or other solution. In order to prevent clogging,
after using a solution other than water, fill the reservoir halfway with warm water, then direct the
tip toward the sink and operate the main unit until the reservoir is empty.
Caring for the product (daily)
● Main unit
Turn the power OFF, then use a soft cloth and a neutral detergent that does not contain a polishing
agent, and wipe the product as necessary.
● Reservoir
Pour out the water in the reservoir and dry it in a well ventilated location. If there is dirt on the
surface, wipe with a soft cloth and a neutral detergent that does not contain a polishing agent.
The reservoir can be washed in a dishwasher if it is placed on the top rack. (The tips cannot be
washed in a dishwasher.)
● Tips
Wipe with a soft cloth and a neutral detergent that does not contain a polishing agent.
Caution
∙ Do not wipe the main unit with alcohol, paint thinner, benzene, nail polish remover or other solvent.
These may damage the product surface.
∙ Do not immerse the main unit in water.
Cleaning inside the main unit (once every 1 - 3 months)
Depending on the mineral content of the water that is used, water scale may build up inside the
main unit.
If it is not removed, it may decrease product performance.
1. Fill the reservoir with water or warm water and add 2 tablespoons of white vinegar or grain
vinegar.
2. Direct the handle and tip toward the sink and operate the main unit until the reservoir is
empty.
3. Fill the reservoir with clean water or warm water and repeat the same procedure around 3
times to rinse out the main unit.