11
Before Use
Charge the device
ATTENTION
• If there is any moisture on or around the main body or charging terminal, be sure to wipe it dry. Charging the device while it is moist could cause damage to the battery.
• Fully charge the battery before using the device for the first time after purchasing.
• When using the device for the first time or when the device has not been used for an extended period of time, it is possible that you will be unable to use the device for very
long even with a full charge displayed. In such a case, recharge the device before using it.
• Use only the included USB cable and AC adapter.
• If the device is charged using an adapter with a rated power supply of DC5V2.OA or less, an error may occur. (Beeping sound: Notification of error with seven beeps)
* In some cases, the device might not charge properly if using a generic cable or AC adapter.
Using a household power outlet
USB cable
Charging terminal
Household power outlet
AC adapter*
* The form presented here is for illustration purposes only.
• While the battery is charging, the Power button ( ) will blink on and off.
• When the battery has fully charged, the Power button ( ) will be on for approximately five seconds and then will switch off. Remove the AC adapter and USB cable.
• At an indoor temperature of approximately 25°C, it will take about three hours to reach a full charge, at which point the device can operate for about 40 minutes.
Actual charging time and operating time will differ depending upon the remaining battery level and the charging environment.
* If charging does not begin after approximately 10 seconds, check whether the USB cable connection is loose.
Power button ( )
