12
Pre-testing on Skin
When using the device for the first time, always test for compatibility.
1
2
3
ATTENTION
How to hold the device and use it on your skin.
●
Be sure to perform a pre-test in order to prevent skin problems from occurring.
●
If a rash, reddening, itchiness, stinging sensation, or other abnormality occurs at the pre-testing site, immediately stop the
pre-test.
●
Check carefully to make sure there are no skin abnormalities before using the device. Stop using the device immediately if
the treatment does not agree with your skin.
Wash the inner side of your arm
with soap and water, then wipe
dry with a towel.
Apply the included skin-care products
(about one pearl-sized drop) to the
center of the electrode head, turn the
power on, and then use the device for
about three minutes while moving it
across the skin (page 13).
Be sure to test at Level 1.
Wash the inner side of your arm
with soap and water, then wipe
dry with a towel.
Continue to use the product only if you
experience no reddening or burning
sensation on your skin within 24 hours.
Hold the main body as shown below,
moving it slowly so that the entire electrode
head remains in contact with your skin.
• Be sure to move the device with the entire
electrode head in contact with your skin.
