10
●
AC adapter
●
USB cable (USB Type-C™)
●
User’s Manual
●
Skin-care product
Accessories
Safety functions
●
Temperature sensor
Output will be reduced automatically for safety reasons when the temperature on the skin or the electrode head rises.
If the temperature becomes too high, the power will be turned off for safety. (When this happens, the electrode head flashes and beeps five times)
If this happens let the device rest for about 30 minutes.
●
Motion sensor
Motion sensor detects movement of the device and pauses output for safety reasons when the electrode head has been used on the same area continuously.
When movement of the device slows, the motion sensor may reduce the level of warmth.
Timer
The treatment duration on the entire face is about six minutes. Device will make one long beep after three minutes as an alert.
Auto Power Off
The device will automatically switch off approximately six minutes after it has been turned on (two short beeps).
Functions
The design and specifications of the device and attached accessories are subject to change for improvement purposes without notice.
• USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum.
Charging Guide Display
When you turn the power on, the color of the lamp on the Power Button (either white or red) will indicate the remaining battery level. If the lamp lights red, recharge the battery
before using the device again. The remaining battery level display will differ according to the condition of the battery and the usage environment.