9
10
Befor
e Use
Befor
e Use
Modes
Features
Functions
Recommended Skin Lotion Operating Time
Level
Frequency
Approximately
3 minutes
Approximately
5 minutes
N/A
N/A
N/A
Approximately
3 minutes
Approximately
5 minutes
: 5 levels
EMS: 3 levels
Ion
+
EMS
DYHP : 5 levels
5 times a week
Treatments 2 to 3 times
a week
Treatments 2 to 3 times
a week
Everyday use is possible
RF Booster Pad
*2
Pore Refining Deep Cleansing
(or cotton pad
with your regular skin lotion
*1
)
Your regular
eye-treatment serum
*1
Apply directly
on the skin.
Standby
LED Lamps
Level Indicator
Button Display
Level Indicator
LED Lamps
Three buttons flashing
CLEAN button
lights up
MOIST button
lights up
MOIST button
flashing rapidly
Blue LED turns on
Red LED turns on
Orange and Red
LED turns on
MOIST buttonflashing
COOL button
lights up
EYE Standby
When rotating the electrode head 180°
When rotating the electrode head 180°
* Only the central electrode head
has cooling functions
1 - 5 lamps
1 - 5 lamps
1 - 3 lamps
RF Booster Pad
*2
Clear Deep Moisturizer
CLEAN
MOIST
COOL
EYE
Mode
Button Display
Treats the area around the
eyes with weak electrical
micro-currents that improve
skin elasticity and EMS that
stimulates the muscles.
(If moisture is insufficient, add
the skin lotion remaining in the
pouch.)
*1. If using your regular skin care products, be sure that they are water soluble. Do not use oil-based or scrubbing skin care products.
Failure to comply may cause malfunctions or skin problems.
*2. See page 21.
Cooling treatment and light
(blue) improve skin elasticity
and skin texture.
Helps beauty ingredients to
penetrate to the stratum
corneum and moisturize
your skin.
Tones your skin and absorbs
dirt that cannot be removed
through normal face
washing.
• Be sure to move the device on your skin while using it (except when using the device in EYE Mode or COOL Mode).
• Use of a cotton pad in MOIST Mode is optional.
• The device and electrode head may get hot after using the COOL Mode. Do not use COOL Mode continuously.
Allow the device to rest (power-off status) for at least half an hour after use.
• RF
• EMS (high-frequency
waves)
• Micro-currents
• Vibrations
(ON/OFF)
• RF
• EMS (high-frequency
waves)
• Ion
• Cleansing
• LED (Red)
• Vibrations
(ON/OFF)
• RF
• DYHP
• LED (Orange/Red)
• Vibrations
(ON/OFF)
• COOL
• LED (Blue)
• Vibrations
(ON/OFF)
