Page 54
6.7.3 Schedule Setup
The alarm that the motion detection triggers can be set to be active or inactive at certain times of the week.
By default, the schedule is set to be “active” at all times “always”.
However you can set the schedule not to trigger alarms at certain times (useful for instance if you don’t want alarms to
go off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you can use these to send
alarms to different places – such as emails, FTP or SD card.
Schedule Setup Options
[
Schedule ID]
Select the ID, you can save up to four schedules and use them for different purposes.
[Everyday]
Activate the alarm daily on specified times. Un-ticking this box will display the days of the week. (See
screenshot)
[Always]
Alarm is always activated.
[Range]
Activates the alarm on specified times.
[Except]
Deactivates the alarm during time specified.
[Start time]
Start time of the alarm.
[End time]
End time of the alarm.
Click “Apply” to confirm your settings once finished.
Содержание YCW003
Страница 50: ...Page 50 Wiring Diagram...
