Page 64
6.9.2 Record on Alarm
Record on alarm records footage to your storage device upon detection of motion trigger.
[Alarm Mode]
Activate/ Deactivates the motion detection alarm.
[Record on Alarm]
Enable/Disable recording videos upon motion detection.
[Record Time]
The number of seconds that the camera should keep recording video after motion stops. If there is any
motion within this time the camera will keep recording until there is no motion for the duration of this parameter. It can
be from 5 seconds to 24 hours.
[Record From]
Select the stream from which it should record.
[Record file name]
A name for the video file.
[Suffix of file name]
Image file name suffix can be either date and time, a sequence number or Date & time with the
record time length.
[Split Time of Record file]
This specifies the maximum duration of one file. If the recording goes on for longer than this
parameter the camera will split the video into a number of files.
Effective Period:
[Always]
Always trigger the alarm upon motion detection
[Schedule]
Trigger the alarm according to the schedule.
Click
Apply
to confirm your settings.
Note
: If you are using the Y-cam with a microSD or NAS drive and it’s not connected to network you should change the
Wireless mode to “Adhoc” otherwise the camera will continuously try to find a local network and may auto-reboot itself.
Содержание YCW003
Страница 50: ...Page 50 Wiring Diagram...