13
02
Setup Your Robotic Arm
Installing the XYZrobot Editor Software
Overview
The XYZrobot Editor is designed specifically to allow for easy creation of poses and action sequences
for use with the Robotic Arm.
Prior to installation, you will need to have the Adruino software and the Bolide driver code installed on
your computer system and MCU board, respectively.
See the following section for step-by-step instructions on installing the XYZrobot Editor software.
Installing the XYZrobot Editor
Before installing the Editor, download the driver from http:\\www.xyzrobot.com.
1.
Locate the downloaded driver file.
2.
Click
setup.exe
to run the application.
The Launching Application window displays. Follow the on-screen prompts to continue.
NOTE:
At the time of writing, the file and folder names were under development. File and folder
names may differ after production.
3.
Click
Install
to install the XYZrobot Editor.