①
Remove any residue or dust from the platform and tank with the scraper, filter or other tools.
②
Mop the fingerprint or resin under the tank or on the glass with with lint-free cloth dampened with alcohol.
③
Brush the level sensor with alcohol if it gets stuck.
Level sensor should return to the original position after a soft push. When the tank is full or the resin gets sticky, the sensor's
movement may be hindered greatly. It may take 1 minute for sensor to return to normal speed. If stuck, remove the remaining
resin from tank before cleaning. If resin in tank is cured, please replace the tank.
Check Before Every Print
Check the following items before printing to ensure printing quality and the operation of the printer.
V1.5
-10-
