V1.5
-3-
⑦
Shake the resin bottle for around
10 seconds to ensure even color.
⑧
Assemble the nozzle cap and the
tube (placed in the rinse basket when
shipped).
⑨
Replace the bottle cap with the
assembled nozzle cap.
Unpacking & Setup
After removing all external packing
materials and tapes…
①
Take off the lid and remove the
accessory tray over the platform.
②
Connect power adapter, power cord
to the printer.
③
Switch on the printer. Initialization
will take around 10 minutes.
④
Raise the platform:
On the printer screen, select
“UTILITIES” and press
►
to find
“MOVE PLATFORM”>”TO TOP”.
And press “YES” to raise the
platform.
⑤
When the platform is moved to the
top, remove the protecting foam.
⑥
Unpack the resin tank and insert it
into the tank slot. Push all the way
until reaching the end.
⑩
Install filling tubes.
Push the tubes all the way down.
First attach the black tube to thick
nozzle, and then connect the
transparent tube to thin nozzle.
Put on the lid, and it’s ready for
printing.
