background image

Ver.1  

April 2016

P 11

da Vinci  

BUILD FROM CARD

JOG MODE

HOME AXES

“HOME AXES” moves the extruder to the lower left corner.

“JOG MODE” is used to manually move the extruder and the print bed.

3 sample models are built into the printer. You may begin your first 3D prints with the samples.

1.Select a sample to print

To home axes:

To move the extruder:

To print a sample:

Select “YES” to proceed.

build FROM CARD
  demo

DEMO  
start building
  no
  yes

2.Put the bed tape on the print bed.

3.Select "YES" to start printing

4.Remove the printed object when the printing has 

finished and the print bed has descended.The bed 

tape is reusable and it can be replaced when it's worn.

home axes
are you sure
  NO
  YES

UTILITIES

1.Select “X-AXIS” (to move right
and left) and "Z-AXIS" (to move up and down). 

Execute "Home Axes" function first to move 

"Z-AXIS".  “Y-AXIS” (to move print bed
backwards and forwards).

2.Select desired increment of travel with 

 and 

 

buttons, and press (or hold) 

 or 

 button for 

desired direction to move the extruder.

jog mode
  x

-

axis

  y

-

axis

  z

-

axis

x

-

axis  ok    exit

  -          ■ 

001mM    

        

  

010mm

    

    

     

020mm

Содержание da Vinci Jr. 1.0






























Отзывы: