Xyron XRN4400, Инструкция по эксплуатации

Страница: 11 / 26

10
Securing Machine to Cart
The machine should be placed so that you have full access to all four sides of the machine. Ensure that
the power and foot pedal cables are not in a hazardous position on the floor.
Check the area to the rear of the machine where laminated items will exit. A flat surface is desired for
items to exit onto. Be sure to clean the area so items do not gather dust.
Machine Mounting Instructions
1. Set machine onto Cart Frame Assembly over screw holes
2. Secure machine to cart using (4) 2 ¼” Hex Head bolt [1].], split washers [X] and flat washers [X]
as shown above.
Positioning and securing the machine on the cart