Xylem WTW pH/Cond 3320, Руководство по эксплуатации

Страница: 63 / 82

pH/Cond 3320 Transmitting data (USB interface)
ba77054d01 02/2014
63
10 Transmitting data (USB interface)
10.1 Options for data transmission
Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data Control Operation / description
Current datas-
ets of the sen-
sors indicated
on the display Manual  With <F2> / [USB output] .
 Simultaneously with every manual
data storage process (see section
9.1 M
ANUAL STORAGE
, page 57).
Automatic, at
intervals  With <F2__> / [USB output] .
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic data storage process (see
section 9.2 A
UTOMATIC DATA STO
-
RAGE AT INTERVALS
, page 58).
Stored mea-
sured values Manual  Displayed dataset with <F2> [USB
output] after calling up from the
storage.
 All datasets with the Output to USB
function.
(see section 9.3.1 E
DITING THE
MEASURED VALUE STORAGE
, page
60).
calibration
records Manual  Calibration record with <F2> / [USB
output]
(see section 5.2.6 C
ALIBRATION
DATA
, page 31).
automatic  At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2> [USB output] key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).