Xylem WTW pH/Cond 3320, Руководство по эксплуатации

Страница: 58 / 82

Data storage pH/Cond 3320
58
ba77054d01 02/2014
If the storage is full The following window appears if all 500 storage locations are occupied:
You have the following options:
 To erase the entire storage, confirm Yes .
 To cancel the storage process and switch to the measured value display,
confirm
No . Then you can e.g. transmit the stored data to a PC (see section
9.3.1 E
DITING THE MEASURED VALUE STORAGE
, page 60) and subsequently
erase the data storage (see section 9.3.2 E
RASING THE MEASUREMENT DATA
STORAGE
, page 62).
9.2 Automatic data storage at intervals
The storage interval ( Interval ) determines the time interval between automatic
data storage processes. With each data storage process, the current datasets
of the sensors indicated on the display are transmitted to the interface at the
same time.
Configuring the
automatic storage
function
Data storage full. Erase?
Yes
No
Warning
15.02.2014
14:15
Back
1. Press the <STO__> key.
The menu for automatic data storage appears.
1 Adjusted entire storage duration
2 Max. available storage duration
3 Graphical display of the storage usage
1
ID number
1
Interval
30 s
Duration
180 min
Continue
0d03h00min
0 1d17h33min
Automatic data storage
15.02.2014
14:15
2
3
Back