19
Manual
US 3.10 713 FLOW CONVERTER 1905 - SW 833062
MJK Automation
Blokken 9
DK-3460 Birkerød
Denmark
Tel
+45 45 56 06 56
www.mjk.com
Indications
At the front of the flow converter, there are 4 function
keys: the flow rate key
Q(t)
, the totalizer key
Σ
Q(t)
, the
alarm key
ALARM
and the sample key
SAMPLE
.
When one of these keys is pressed one or more times,
the different function menus appear. The menus available
depend on how you configure the flow converter.
Configuring the flow converter is accomplished in the
configuration menus, which in turn are divided into sev-
eral sub-menus. You gain access to the configuration
menus by pressing the MENU key. In each menu the dif-
ferent settings are obtained by pressing the arrow keys.
Note: A complete diagram of the menus can be
found in the back of this manual. This diagram
will be very helpful to you if you choose to
configure the flow converter!
Flow Key.
See also page 20.
Totalizer Key.
See also page 20.
Sample Key.
See also page 21.
Alarm Key.
See also page 21.
Last 9 alarm log.
99 x 24
hours log