Xylem GOULDS e-SVE Series, Инструкция по эксплуатации

Страница: 35 / 52

6.6.2 Settings parameters
Parameter number Parameter name Description
P20 Password entering [0-999] The user can enter here the system
password, which gives access to all
system parameters: this value is
compared with the one stored in P22.
When a correct password is entered,
the system remains unlocked for 10
minutes.
P21 Jog mode [MIN-MAX] It deactivates the internal controller of
the unit and forces the actual Control
Mode (ACT): the motor starts and the
value of P21 becomes the temporary
ACT setpoint. It can be changed by
just entering a new value on P21
without confirming it; otherwise, it
causes immediate exit from
temporary control.
P22 System password [1-999] This is the system password, and
must be the same as the password
entered in P20.
Default: 66.
P23 Lock Function [OFF, ON] By using this function, the user can
lock or unlock parameter setting in
the main menu.
When ON, enter the P20 password to
change the parameters.
Default: ON.
6 System Setup and Operation
Smart Pump Range INSTRUCTION MANUAL 33