Xylem GOULDS e-SVE Series, Инструкция по эксплуатации

Страница: 29 / 52

6.4.5 Units of measurement
LED on Measurement active Notes
10xRPM Impeller rotation speed The display shows the speed in
10xRPM
BAR Hydraulic head The display shows the value of the
head in bar
PSI The display shows the value of the
head in psi
6.5 Display
6.5.1 Main Visualization
Display Mode Description
OFF OFF Contacts 11 and 12 (see parameter
5.4) are not short-circuited.
Note: It has lower display priority
than STOP mode.
STP STOP Pump stopped manually.
If the pump is switched on after
setting P04 = OFF (see Par. 6.5.1), it
is stopped so that the motor is not in
operation, and STP flashes (STP
→
STP).
To manually stop the pump:
• Example A:
– HCS, MES, MSY control
modes with initial required
value (head) of 4.20 bar and
minimum value 0.5 bar:
4.20 BAR
→ press → STP once.
• Example B:
– ACT control mode with initial
required value (speed) of
200 10xRPM and minimum
value 80 10xRPM: 200
10xRPM
→
press
→
STP once.
6 System Setup and Operation
Smart Pump Range INSTRUCTION MANUAL 27