Xylem GOULDS e-AB Series, Инструкция по эксплуатации

Страница: 43 / 56

Parameter number Parameter name Unit of measurement Description
P66 Test Run – Speed [Min-
Max]
G
rpmx10 This parameter sets the
pump rotational speed
for the Test Run.
The Min and Max
speeds depend on the
pump type.
Default: 200 rpmx10.
P67 Test Run – Time
Duration[0-180]
G
s This parameter sets the
duration of the Test Run.
Default: 10 s.
6.6.8 Special parameters
Parameter number Parameter name Unit of measurement Description
P68 Default Values Reload
[NO, rES]
If set to RES, after
confirmation this
parameter performs a
factory reset that reloads
the default parameter
values.
P69 Avoid Frequent
Parameters Saving [NO,
YES]
This parameter limits the
frequency with which the
unit stores the required
value P02 in the
EEPROM memory, in
order to extend its life.
This could be particularly
useful in applications
with BMS control devices
that require continuous
variation of the value for
fine tuning purposes.
Default: NO.
6 System Setup and Operation
Smart Pump Range INSTRUCTION MANUAL 41