Xylem GOULDS e-AB Series, Инструкция по эксплуатации

Страница: 22 / 56

Table 5: Power supply wiring procedure
Reference
1. Open the terminal box cover (2) by removing the
screws (1).
2. Insert the power cable in the M20 cable gland
(5).
Figure 2
on page 13
1. Connect the cable according to the wiring
diagram.
2. Connect the earth conductor (mass), making
sure that it is longer than the phase conductors.
3. Connect the phase leads.
Figure 6
on page 20
1. Close the cover (2) and tighten the screws (1). Figure 2 on page 13
Table 6: I/O wiring procedure
Reference
1. Open the terminal box cover (2) by removing the
screws (1).
Figure 2
on page 13
1. Connect the cable according to the wiring
diagram.
Figure 7 on page 21
1. Close the cover (2) and tighten the screws (1). Figure 2 on page 13
L2
1
2
3
10 A
L1
1
L1
208÷240
380÷460
L2
L3
L1
L2
L3
4
3
2
1~
3~
RS001940
/ e-AB3
10 A
10 A
10 A
10 A
Figure 6: Wiring diagrams
4 Installation
20 Smart Pump Range INSTRUCTION MANUAL