Xycom AHIP-370, Руководство пользователя

Страница: 31 / 65

Chapter Three – BIOS Setup Menus
31
internal to the Pentium processor, and level two, or external cache, is the
cache-on-a-stick site (COAST) which can accommodate 256 or 512 K of
high-speed cache memory.
Table 3-3. Memory Cache Submenu Options
Option Description
Memory Cache Controls the state of Pentium II memory cache.
Cache System BIOS Area Allows the system BIOS memory area to be cached if enabled. Enabling also
increases system performance. The default is enabled and write protected.
Cache Video BIOS Area Allows the video BIOS memory area to be cached if enabled. Enabling also
increases system performance. The default is enabled and write protected.
Cache 0 - 512K Controls caching of 512K base memory. Default is Write Back Caching.
Cache 512K - 640K Controls caching of 512K and 640K base memory. Default is Write Back Caching.
Cache Extended Memory Area Controls caching of system memory above 1 MB. Default is Write Back Caching.
Cache Memory Region Caches the corresponding memory when enabled. Memory in this area is
usually extended BIOS or AT-bus memory. Enabling cache may increase
system performance, depending on how the extended BIOS is accessed. The
default is disabled.
Advanced Menu
Figure 3-4. Advanced Setup Menu
Xycom BIOS Setup Utility
Main Advanced Security Exit
Item Specific Help
?
I/O Device Configuration
?
Advanced Chipset Control
?
PCI Configuration If the item you are
viewing has specific
Installed O/S: [other] help, it will
Reset Configuration Data: [No] be listed here.
Large Disk Access Mode: [DOS]
Local Bus IDE adapter: [Both]
Floppy check: [Disabled]
Summary Screen: [Disabled]
Boot-time Diagnostic Screen [Enabled]
?
On-board Socket Site:
?
Flat Panel
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Submenu F10 Previous Values