20
144812(D)
Chapter 3 – Monitor Settings
Caution
Leaving your TFT LCD display on constantly can result in temporary image
retention (TIR). TIR can be avoided by using a screen saver, enabling the idle/doze
timeout feature on your computer, or by turning off the display when it is not in
use.
On-Screen Display (OSD) Switch
The OSD Select switch is located on the I/O panel (see Figure 2-5) and offers two
choices: enable or disable. The keys on the front of the monitor can be locked-out by
setting the OSD switch to disable, or unlocked by setting the OSD switch to enable.
Caution
Touch data can be transmitted to host while OSD is enabled or disabled.
Mode and Image Adjustment
Not all video controllers produce exactly the same video output levels or the same
timing. The 5015SLR uses on-screen configuration menus to make setup and
adjustment easy. For units with black bezels, the menus are selected and the menu
items are adjusted using the buttons located on the front panel of the monitor. For
stainless steel bezels the buttons are located on the rear of the unit. With the OSD
enabled, follow the general instructions below to navigate through the adjustment
menus and make adjustments.
Note
See Figure 2-3 and Figure 2-4 for detailed pictures of the OSD controls.
With the “POWER” light on and video information already displayed on the screen,
press MENU to view the onscreen adjustment menu icons. Then use the
LEFT
or
RIGHT
to highlight one of the icons. Once the desired icon is highlighted use the
MENU key to select the feature in the menu that you want to adjust. Use the LEFT
or RIGHT keys to increase or decrease the feature’s value. Use the MENU key to
select another feature that you would like to adjust or press the AUTO key to back
out of a particular menu. If no features are selected for any of the adjustment menus
then pressing the AUTO key will exit the OSD menu. Waiting for a few seconds will
also cause the OSD menu to be exited. Below, icons and the associated adjustment
features are listed:
