5015SLR Flat Panel Industrial Touch Monitor Chapter 2 – Installation
15
144812(D)
It is the responsibility of the customer to ensure that the product is properly rated for
the location. If the intended location does not presently have a Class, Division, and
Group rating, then users should consult the appropriate authorities having jurisdiction
in order to determine the correct rating for that Hazardous Location.
In accordance with Federal, State/Provincial, and Local regulations, all hazardous
location installations should be inspected by the appropriate authority having
jurisdiction prior to use. Only technically qualified personnel should install, service,
and inspect these systems.
Warning
Suitable for use in Class I, Division 2 Groups A, B, C, and D, and Class II,
Division 2, Groups F and G hazardous locations or non-hazardous locations
only
.
Temperature Code T6.
Warning - Explosion Hazard
Substitution of components may impair suitability for Class I, Class II,
Division 2.
Advertissement Risque D’ Explosion
La substitution de composants peut rendre ce materiel inacceptable pour les
emplamements de classe I, II, Division 2.
Warning - Explosion Hazard
Do not disconnect equipment unless the power has been switched off or the
area is known to be non-hazardous.
Advertissement Risque D’ Explosion
Avant de deconnecter l’equipment, coupler le courant ou s’assurer que
l’emplacement est designe non dangereux.
Warning - Explosion Hazard
When in hazardous locations, turn off power before replacing or wiring
modules.
Advertissement Risque D’ Explosion
Dans les situations hasardees, couper la courant avant de remplacer ou de
cabler les modules.
