Xycom 3700 Series Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 83

Xycom 3700 Series Скачать руководство пользователя страница 65

3700 Series Flat Panel Industrial PC

Chapter 5 – Troubleshooting

59

143311 (H)

Windows









2000 Reinstallation

If you need to reinstall the Windows® 2000 operating system, refer to the

Pro-face/Xycom Workstation Recovery Media Software Installation Instructions
for Microsoft Windows 2000

(shipped with systems preinstalled with Windows

2000). This document is devoted to the reinstallation of your Windows 2000
operating system and drivers, utilizing the Recovery Media provided with your
Pro-face/Xycom industrial computer. If you want to install a new operating system
or reinstall a current operating system, refer to the operating system’s manual for
directions.

Note

This procedure assumes that the computer hard disk drive has been
completely corrupted or replaced.

Warning

This procedure will destroy data that may exist on the hard disk drive.

Windows NT









Reinstallation

If you need to reinstall the Windows® NT operating system, refer to the

Pro-face/Xycom Workstation Recovery Media Software Installation Instructions
for Microsoft® Windows® NT Workstation 4.0

(shipped with systems preinstalled

with Windows NT). This document is devoted to the reinstallation of your
Windows NT Workstation 4.0 operating system and drivers, utilizing the Recovery
Media provided with your Pro-face/Xycom industrial computer.

Note

This procedure assumes that the computer hard disk drive has been
completely corrupted or replaced.

Warning

This procedure will destroy data that may exist on the hard disk drive.

Windows XP® Reinstallation

If you need to reinstall the Windows® XP operating system, refer to the

Pro-face/Xycom Workstation Software Installation Instructions for Microsoft
Windows XP

(shipped with systems preinstalled with Windows XP). This

document is devoted to the reinstallation of your Windows XP operating system
and drivers, utilizing the XP CD provided with your Pro-face/Xycom industrial
computer. If you want to install a new operating system or reinstall a current
operating system, refer to the Windows XP Professional CD-ROM (shipped with
systems preinstalled with Windows XP Professional).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
63
64
65
66
67
...
»

Содержание 3700 Series




















































































Отзывы:

Нет отзывов