3600 Series Flat Panel Industrial PC
Appendix C – Pinouts
71 142214 (F)
TSKAM Board 2, Part Number 142430-001/2
Table E - 2 lists the jumper and switch settings for the TSKAM 2.
Table E - 2. Jumper and Switch Settings for TSKAM 2
Switches/Jumpers Position/Setting Function
SW1 (1-4)
Assembly
dependent
Keypad type for 9915 SW1.1 ON, SW 1.2,3,4
OFF
Keypad type for 3600 All OFF
SW2 (1-4)
All Off
Reserved
JP3
A
B
Connects H8 keyboard controller pin P8-
4/IRQ3* to HOST_KBDATA
Connects H8 keyboard controller pin P8-4/IRQ3*
to programming header P6 pin 4
JP4
A
B
Connects H8 P8-5 to H8MDATA
Connects H8 P8-5 to H8 Programming header
P6 pin 3
JP5
A
B
Connects H8 pin P8-1 to H8MCLK
Connects H8 pin P8-1 to Program header P6
pin 9
JP7
A
B
Enables H8 ROM access
Disables H8 ROM access
JP8
A
B
Disconnects H8 STBY* pin from header
Connects H8 STBY* pin to Program header P6
pin 11
JP9
In
Out
Connects remote switch interrupt to H8
Disconnects remote switch interrupt from H8
JP14
A
B
3.3V LCD Power
5V LCD Power
JP15
1
A
B
15 inch display 80 Mhz pixel clock
12 inch display 40 Mhz pixel clock
JP16
In
Out
Front/rear mouse clock routed to H8
Front/rear mouse clock not routed to H8
JP17
In
Out
Front/rear mouse data routed to H8
Front/rear mouse data not routed to H8
JP18
In
Out
Front/rear mouse clock routed to 87C52
Front/rear mouse clock not routed to 87C52
JP19
In
Out
Front/rear mouse data routed to 87C52
Front/rear mouse data not routed to 87C52
JP20
1
A
B
15 inch display brightness control
12 inch display brightness control
indicates factory default position
1
factory default position depends on display size – only one position will be jumpered
