3115T Thin Line Industrial Flat Panel PC Chapter 3 – POS-370 Control Board and BIOS Setup
38
141876(E)
Table 3–19. Hard Disk selections
Item
Options
Description
IDE HDD Auto-detection Press Enter
Press Enter to auto-detect the HDD on
this channel. If detection is successful, it
fills the remaining fields on this menu.
IDE Primary Master
None
Auto
Manual
Selecting ‘manual’ lets you set the
remaining fields on this screen. Selects
the type of fixed disk. "User Type" will let
you select the number of cylinders,
heads, etc. Note: PRECOMP=65535
means NONE!
Capacity
Auto Display your disk
drive size
Disk drive capacity (Approximated). Note
that this size is usually slightly greater
than the size of a formatted disk given by
a disk checking program.
Access Mode
Normal
LBA
Large
Auto
Choose the access mode for this hard
disk
The following options are selectable only if the ‘IDE Primary Master’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this hard
disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
**** Warning: Setting a value of 65535
means no hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track