XVision XP116VS, Руководство пользователя

Страница: 50 / 158

50

Channel: select the current camera channel.

Protocol: select corresponding PTZ protocol(such as PELCOD)

Address: default address is 1.

Baud rate: select corresponding baud rate. Default value is 9600.

Data bits: select corresponding data bits. Default value is 8.

Stop bits: select corresponding stop bits. Default value is 1.

Parity: there are three options: odd/even/none. Default setup is none.
Figure 4-34
After completing all the setting please click save button.
In one window display mode
, right click mouse (click ―Fn‖ Button in the front panel or click
―Fn‖ key in the remote control). The interface is shown as in Figure 4-35.
Figure 4-35
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 4-36.
Here you can set the following items:

Step: value ranges fro 1 to 8.

Zoom

Focus

Iris
Please click icon and to adjust zoom, focus and iris.