XVision 4 Channel Standalone DVR, Руководство пользователя

Страница: 12 / 35

1. Setup the First Detective Area
First, Press (UP, DOWN, FF, REW ) to Set the UPPER-LEFT Point of
the First Detective Area.
Then, Press (UP, DOWN, FF, REW ) to Set the DOWNER-RIGHT Point
of the First Detective Area.
2. Setup the Second Detective Area
First, Press (UP, DOWN, FF, REW ) to Set the UPPER-LEFT Point of the
Second Detective Area.
Then, Press (UP, DOWN, FF, REW ) to Set the DOWNER-RIGHT Point
of the Second Detective Area.
3.Finish.
．
9
．
SENSOR SETUP
H/W SENSOR SETUP
CHANNEL-1
CHANNEL-2
CHANNEL-3
CHANNEL-4
PRESS(UP,DOWN), THEN(SELECT)
PRESS(MENU) TO EXIT
TYPY:NORMAL-OPEN
NOT INSTALLED
TYPY:NORMAL-CLOSE
NOT INSTALLED
* Factory default password:111111
*
HDD must be formatted before installation, replacement &
re-installation.
HARD DRIVE SETUP
HARD DRIVE SETUP
OVERWRITE ENABLED (YES )
MASTER HDD SIZE 80000MB
MASTER HDD USED 0MB0 %
MASTER HDD FORMAT
(1)Overwrite Enabled
YES : Overwrite
.
NO : Stop Recording
.
(2)Master HDD Status
Indicates the usage of the HDD including volume & percentage
(3)Master Format
Select this item to format HDD, screen show:
PASSWORD INPUT (6) ------ 6 digits .
If password correct, the screen shows :“ Password Correct“
“ Hard Disk Formatted“
Otherwise, it shows:“ Password Incorrect“